Make cable hooks slightly stronger

README.adoc

@@ -4,6 +4,19 @@ Solvespace models
 This is a collection of my custom-made 3D models intended for 3D printing,
 with some commentary.  Solvespace 3.0 or newer is required.
 
+18650 battery charger
+---------------------
+The RD6006P laboratory power supply can charge li-ion batteries, but you have to
+make your own battery holder.  I've made it so that the thermocouple merely sits
+in a trench underneath, and the battery needs to be pressed down against it.
+
+image::18650-battery-charger.jpg[18650 battery charger]
+
+Antenna connector cover
+-----------------------
+Just a one-off box to prevent cables from getting entangled upon adjusting
+the height of my desk.
+
 Bathtub strainer
 ----------------
 The first thing I've ever modelled for printing, hence the simple geometry.
@@ -11,6 +24,13 @@ Prevents larger objects from falling in.
 
 image::bathtub-strainer.jpg[Bathtub strainer]
 
+Cable bushing
+-------------
+A trivial model for the back of IKEA PLATSA, which is 3 mm thick.  The lip is
+just wide enough to cover my mistakes.
+
+image::cable-bushing.jpg[Cable bushing]
+
 Cable hooks
 -----------
 To be glued to a desk using
@@ -20,13 +40,21 @@ Prone to delaminating under load when the printer is badly tuned.
 
 image::cable-hook-narrow.jpg[Narrow cable hook]
 
+CD spindle
+----------
+One-off model to enable infinite stacking of CDs and DVDs.  To be printed in
+spiral vase mode, and deserves to have a bottom layer/cover added--cardboard is
+the obvious choice of material for that.
+
 Geiger stick
 ------------
-For https://www.aliexpress.com/item/33058301946.html[KB6011] and
-a specific diameter of aluminium pipe.  Use at least three perimeters for
-the handle, or it may break easily.
+For https://www.aliexpress.com/item/33058301946.html[KB6011] and specific
+aluminium pipes.  Use at least three perimeters for the handle, or it may break
+easily.  The pipe needs to be inserted with considerable force.
 
-image::geiger-holder.jpg[Geiger holder]
+image::geiger-holder-12-mm.jpg[Geiger stick PETG]
+
+image::geiger-holder.jpg[Geiger stick PETG and ASA]
 
 IKEA PLATSA screw plug
 ----------------------