22 lines
1.1 KiB
Plaintext
22 lines
1.1 KiB
Plaintext
|
Measurements:
|
||
|
|
- change Solvespace so that DXF import automatically adds constraints
|
||
|
|
on lines that share points (exactly same)
|
||
|
|
- adjust the other dimensions according to SVG/DXF measurements,
|
||
|
|
see uncommitted files here in pcb-outlines/
|
||
|
|
|
||
|
|
Adjustments:
|
||
|
|
- on the right part make sure the stubs have space around when viewed
|
||
|
|
from the bottom, like with the left part
|
||
|
|
- make the top and bottom tolerances a bit bigger (try 0.05, 0.10 on each side)
|
||
|
|
- the far edge should be about 1 cm taller, otherwise pressing the bottom
|
||
|
|
row with MBK keycaps isn't very pleasant
|
||
|
|
|
||
|
|
Making a better, beefier version:
|
||
|
|
- the cover has no chance of working well with such a small base, it needs
|
||
|
|
to lie straight on the PCB, and the whole assembly needs to wrap the PCB
|
||
|
|
including the sides, otherwise it doesn't work, nor does it look good
|
||
|
|
- underlighting has turned out to be too non-uniform, even when using
|
||
|
|
a slightly diffusive translucent material; jet black would look better,
|
||
|
|
maybe with some small squints/grooves or holes to prevent the LEDs from
|
||
|
|
drawing power undetected
|