Solvespace models
=================

This is a collection of my custom-made 3D models, with some commentary.

Bathtub strainer
----------------
The first thing I've ever modelled for printing, hence the simple geometry.

image::bathtub-strainer.jpg[Bathtub strainer]

Cable hooks
-----------
To be glued to a desk using
https://www.aliexpress.com/item/32905098341.html[double-sided adhesive tape].
Prone to delaminating under load when the printer is badly tuned.

image::cable-hook-narrow.jpg[Narrow cable hook]

Geiger stick
------------
For https://www.aliexpress.com/item/33058301946.html[Huahe M4011] and
a specific diameter of aluminium pipe.  Use at least three perimeters for
the handle.

image::geiger-holder.jpg[Geiger holder]

Book scanning stand
-------------------
The pitch of 7 cm fits Samsung Galaxy Note 20 Ultra.  Not as useful as expected,
however the idea of using aluminium pipes has turned out to be a good one.

image::phone-scanner-elbow.jpg[Book scanning stand]

Paper boxes
-----------
These are actually 2D models for making closable little containers out of
folded-up paper and a few drops of glue.  It takes a lot of time to make these,
so not recommended.

image::paper-boxes.jpg[Paper boxes]

Pill container
--------------
This is not a particularly good design, and the tolerances are somehow off,
so I failed to have it work after reprinting on a different machine.
Large pills can be very difficult to extract.

image::pill-container.jpg[Pill container]

Strainer adapter
----------------
Fixating a pretty stainless steel strainer in my slightly incompatible sink
drain.

image::strainer-adapter.jpg[Strainer adapter]

Trivial Kailh Choc keycap
-------------------------
Fast to print and perfectly functional in PLA, though obviously not very
comfortable, nor nice to look at.

image::trivial-choc-keycap.jpg[Trivial Kailh Choc keycap]